I am trying to get the NG firewall to build a tunnel to a Cisco ASA 5505 firewall. I have the VPN policy set up on both ends, and I believe I have the no-nat policies set on each side. But the tunnel never comes up. In fact, I see the ESP packets leaving the NG firewall but I do not see them at the ASA 5505.
I looked through the documentation but I still cannot get the tunnel up. So, if someone could help me either by pointing out where the information is or by giving me some instructions I would appreciate it.
NG Firewall F400 Site2Site VPN to Cisco ASA 5505
No replies to this topic