Jump to content


Photo

Additional colums in the NGADMIN at vpn-view

VPN NGADMIN

This topic has been archived. This means that you cannot reply to this topic.
No replies to this topic

#1 Johannes Bucher

Johannes Bucher
  • Members
  • 21 posts

Posted 04 March 2013 - 09:48 AM

because of the kernel limitation that the combination of "server name" + "." + "InterfaceName" + "." + "Vlan-id" must not be longer than 15 characters, the view in the vpn module of the gui with a high number of tunnels is very messy, as in larger environments (like our) the server name only may consist of 3 characters, if a 4-digit vlan-id is required (as it is the case in larger environments).
now these entries under "name" in our environment sounds like "v00-pE1", "09C-pE1" ... and if you keep in mind, that we have over 100 client groups with a lot of offices you see that you have no chance to keep track!
therefore it would be very helpful if additional columns with eg. following information would be incorporated: serverdescription, boxname, range and cluster for each tunnel (source and target).