Jump to content


Photo

Route between VLANS


This topic has been archived. This means that you cannot reply to this topic.
1 reply to this topic

#1 Tim

Tim
  • Members
  • 1 posts

Posted 22 November 2013 - 01:40 AM

   I have inherited a link Balancer 330 with three VLAN's; VLAN 1 (Default), VLAN 2 (Corp), and VLAN 3 (Public).  The default VLAN consist of the network devices; switches, WAP's, etc.  I have two switches that are setup with the VLANS correctly.  If I am on VLAN 1 I can connect to the devices on VLAN 1 and if I am on VLAN 2 I can connect to those devices.  What I can't do is connect to a Device on VLAN 1 when I am on VLAN 2.  I can ping but that's it, now I understand that I need to have something routing between these two subnets.  I was hoping to have the Link Balancer do this but I am coming to the conclusion that it's not possible.  Basically I want to setup a router on a stick and use ACL's to limit only specific machines to VLAN 1.  What makes me believe that this might be possible is because I can ping but not connect via http or https.  

  Is this possible to do with the equipment I have?  If it is what am I missing?



#2 Miguel Fagyan

Miguel Fagyan
  • Members
  • 8 posts

Posted 24 April 2017 - 10:50 AM

oh my since 2013 no body replied on this post....