Jump to content


WOL + Start Stop Scripts

wol vpn scripts

This topic has been archived. This means that you cannot reply to this topic.
No replies to this topic

#1 Bernhard Neuner

Bernhard Neuner
  • Members
  • 18 posts

Posted 15 April 2014 - 05:11 PM

In our headquater we have about 300 client pcs. Due our energy policy they should sleep after some idle time. Our vpn users have remote access to their own workstations and should to be able to wake up their workstations if they connects a vpn tunnel. Every vpn user has it's own lic file (no group vpn licences).

In this scenario we have following needs:

1.) Wake On LAN
A integrated wake on lan tool like etherwake would be very helpful. Energysaving is an hot topic in the next years - even in other companys.

2.) Serverside start/stop scripts for client2site vpn connections
It already works with site2site tina tunnels. Would be great if there is the same possibility for client2site vpn connections via barracuda vpn client.

With a combination of these two needs we would able to solve the scenario above perfectly with barracuda ng.