Jump to content


Photo

Firmware 3.0.003.040 has been released to EA.


  • Please log in to reply
3 replies to this topic

#1 Nicholas Belluni

Nicholas Belluni
  • Moderators
  • 82 posts

Posted 16 May 2014 - 12:57 PM

As of today the CudaTel Communication Server firmware 3.0.003.040 is now 100% EA.

 

Summary of new firmware:

 

This firmware is a minor feature and maintenance release. This upgrade includes Salesforce click to dial integration, Polycom VVX side card, and the Yealink model T19 phone.

 

Release Notes: http://updates.cudasvc.com/cgi-bin/view_release_notes.cgi?type=bpsware&platform=2&version=3.0.003.040

 Version 3.0.003:
  • Feature: Salesforce Click to Dial integration. [BNPH-10036]
  • Feature: Added support for the Polycom VVX color expansion module. [BNPH-9865]
  • Feature: Added support for the Yealink T19 Phone. [BNPH-10561]
  • Fix: Corrected behavior of the phone registration table in the web interface. [BNPH-10410]
  • Fix: Corrected behavior of Automated Attendant when zero is used as the prefix. [BNPH-10443]
  • Fix: Repaired Busy Lamp Field on Polycom phones when used behind NAT. [BNPH-10372]
  • Fix: Repaired daylight savings time for several regions. [BNPH-10406, BNPH-10308]
  • Fix: Repaired sorting on the switchboard in the web interface. [BNPH-10466, BNPH-10564]
  • Fix: Repaired soft button provisioning on the Yealink model VP530 video phone. [BNPH-10098]
  • Fix: Repaired line key provisioning on the Yealink model T22P. [BNPH-10353]
  • Fix: Adjusted font scaling of the Queue Monitor in the web interface. [BNPH-10556]
  • Fix: Improved memory utilization of the telephony engine. [BNPH-10501]
  • Fix: Corrected behavior of network settings during initial setup from the web interface. [BNPH-10604]
  • Fix: Improved web server and telephony engine security. [BNSEC-4087, BNSEC-4362]
  • Fix: CVE-2014-01630 OpenSSL "Heartbleed". [BNSEC-4239]

Documentation for Salesforce click to dial integration: http://www.cudatel.com/docs/advconfig/CudaTel_SalesForce_Integration.pdf



#2 Sam Napier

Sam Napier
  • Members
  • 8 posts

Posted 16 May 2014 - 01:04 PM

There is currently an issue with downloading the new firmware through the management interface.

 

The version number is being displayed improperly and fails when you attempt to download.



#3 Sam Napier

Sam Napier
  • Members
  • 8 posts

Posted 16 May 2014 - 01:27 PM

This issue is now resolved



#4 TekMason

TekMason
  • Members
  • 139 posts
  • LocationCanada

Posted 16 May 2014 - 06:30 PM

Thanks for the update Nicholas.  Looking forward to being able to program my VP530 buttons with

  • Fix: Repaired soft button provisioning on the Yealink model VP530 video phone. [BNPH-10098]

Downloading now.

 

TekMason