Jump to content


Photo

VPN Client AutoConnect?

client access remote vpn automated

  • Please log in to reply
2 replies to this topic

#1 Matthew McLimans

Matthew McLimans
  • Members
  • 4 posts

Posted 18 November 2014 - 05:04 PM

Hi all,

 

Scenario:

I have several remote computers running outside my corporate network.  These computers do not have a user working on them as they run by themselves. 

 

What I want to do:

I want to setup the Barracuda VPN client to automatically start when the computer is turned on.  I understand I can save password/username etc, but is there anyway to make the Barracuda Access Client initialize the connection automatically? (i.e. through a service, etc?)

 

Thanks!



#2 Der Obsteiger

Der Obsteiger
  • Members
  • 5 posts

Posted 19 November 2014 - 04:43 AM

There is a techlib article for this, originally for the NG Firewall but as the products are essentially the same this applies here too :

https://techlib.barr...e Direct Access



#3 Matthew McLimans

Matthew McLimans
  • Members
  • 4 posts

Posted 19 November 2014 - 01:05 PM

Thanks Der! 

 

The implementation you provided works really well.  

 

There is one issue I am still experiencing... When the remote computers reboot themselves, they always ask for a password on reboot.  Is there anyway to store the password for that VPN?  I have Remember MS Credentials set to "Local"