Jump to content


Photo

Vx Virtual Appliance activation in Virutual Box

Vx Virtual appliance activation Virtual Box

  • Please log in to reply
2 replies to this topic

#1 Sajeev Chandrapragasam

Sajeev Chandrapragasam
  • Members
  • 49 posts

Posted 27 January 2015 - 02:13 AM

How do i activate Load Balancer ADC which is load in Oracle Virtual Box ? It says "Can't connect, Check your Network"



#2 Kaushik Thirumurthy

Kaushik Thirumurthy
  • Barracuda Team Members
  • 41 posts

Posted 28 January 2015 - 06:25 AM

Hello Sajeev,

 

Please ensure that the outbound traffic from the device on port 80 is allowed without any restriction. Kindly remove the proxy configuration, if any, for provisioning the ADC.

 

Also ensure that the ICMP traffic is allowed from the device to our update servers.

 

The IP range of our support and Update servers would be as follows

 

  • 64.235.144.0/20  
  • Usable IPs = 64.235.144.1 to 64.235.159.254 for 4094
  • Broadcast = 64.235.159.255
  • Netmask = 255.255.240.0  = /20
  • Wildcard Mask = 0.0.15.255 205.158.110.0/24 216.129.105.0/24 216.129.125.0/24

Once you enter the license code, the device would go for a reboot. Upon the same, it would resume with valid serial number.

 

Thanks,

 

Kaushik.



#3 Sajeev Chandrapragasam

Sajeev Chandrapragasam
  • Members
  • 49 posts

Posted 30 January 2015 - 12:56 AM

Thank you