Jump to content


SSLVPN cannot access same network as VPN

SSLVPN VPN x300 firewall

This topic has been archived. This means that you cannot reply to this topic.
1 reply to this topic

#1 Sean McCarthy

Sean McCarthy
  • Members
  • 5 posts

Posted 24 April 2015 - 04:30 PM



We have (2) subnets here.  192.x.x.x/8 & 10.x.x.x/24


Both of these are accessible from the VPN Client via Mac & Windows machines.  However when we connect to the SSLVPN , log in with the same credentials as the VPN Client, neither of these networks are available after clicking "my network".  When you show the status of the SSLVPN connection, it clearly lists both network routes are assigned.  If i create a web forward to a application running on a machine on the 10.x.x.x network, it will take me there, but i cannot connect to it by entering it into a browser like we would normally do locally or when connected via the VPN Client.


I am extremely baffled and fearing i am missing something silly.


Any help appreciated.



#2 Sean McCarthy

Sean McCarthy
  • Members
  • 5 posts

Posted 01 July 2015 - 11:23 AM

Resolved with Firmware 6.7.0 update.  New SSLVPN client serves correct IP address now and no longer the default 169.xxx.xxx.xxx