Jump to content


Photo

Web Filter 610 - Rear Ethernet Ports?

Web Filter 610

This topic has been archived. This means that you cannot reply to this topic.
No replies to this topic

#1 Aaron Albrecht

Aaron Albrecht
  • Members
  • 9 posts

Posted 29 July 2015 - 04:24 PM

I just installed a 610 Web Filter that we received for a 30 day evaluation, but the documentation I have for this model seems to be a bit light.  What exactly are the two rear ethernet ports on the 610 web filter designated for?  I assume they are management ports, but I can't find where I would configure these.  In my mind I'm thinking it would be best to setup the management ports on a dedicated management VLAN, then keep the LAN port on the same subnet that the inside firewall port and switch uplinks are on.  However I'm not seeing where I configure these other ports on the back side of the unit.  If these aren't management ports, what are they for?

 

I have a meeting scheduled with a Barracuda tech this Friday, but I want to keep that mostly focused on the web filter features itself and not basic configuration setup so I figured I'd ask this here.