Jump to content


Photo

Enabling SSL inspection vs certificate

SSl inspection

  • Please log in to reply
2 replies to this topic

#1 Alonso Garcia

Alonso Garcia
  • Members
  • 4 posts

Posted 21 August 2015 - 09:40 AM

Dear All....

When trying to enable SSL inspection (the aplication control is  ON) the managment force to select a certificate, however I have no certificate (the fiel to select the certificate is NONE)

it is mandatory to select the certificate?

any ideas??? firmware 6.8xxx.

Regards



#2 Michael Zoller

Michael Zoller
  • Barracuda Team Members
  • 188 posts

Posted 26 August 2015 - 01:00 AM

Hi,

Yes, you have to upload/create a certificate for SSL Inspection using the Certificate Manger. See https://techlib.barr...tificateManager

for instructions how to upload and set up the certificate. Make sure to select the CA option - otherwise it will not work for SSL Inspection!

 

Hope this helped! 



#3 Alonso Garcia

Alonso Garcia
  • Members
  • 4 posts

Posted 26 August 2015 - 01:34 PM

Hi Michael, thank you for clarifying this, I was thinking that a certificate was loaded   by default...

 

Best Regards

.