Jump to content


Photo

Enabling extra Ethernet ports in Vx in Hyper-V

hyper-v Vx NG Firewall Ethernet

  • Please log in to reply
4 replies to this topic

#1 Sajeev Chandrapragasam

Sajeev Chandrapragasam
  • Members
  • 49 posts

Posted 05 October 2015 - 04:53 AM

How do i enable extra Ethernet ports in NG Firewall Vx F1000 in Hyper-V ? I have added virtual Ethernet port to virtual appliance, But it's not detecting in firewall configuration. 



#2 Michael Zoller

Michael Zoller
  • Barracuda Team Members
  • 205 posts

Posted 05 October 2015 - 05:09 AM

Hi,

You need to add them to the NG Firewall configuration: https://techlib.barr...tworkInterfaces



#3 Sajeev Chandrapragasam

Sajeev Chandrapragasam
  • Members
  • 49 posts

Posted 05 October 2015 - 07:21 PM

Hi,

You need to add them to the NG Firewall configuration: https://techlib.barr...tworkInterfaces

Thank you



#4 Pete d'Oronzio

Pete d'Oronzio
  • Members
  • 1 posts

Posted 18 November 2015 - 12:10 AM

Hi there!  I've read that article and can add interfaces.  However, I can't find any place to select the name of the NIC.  In other VMs, the NICs are called ethernet; ethernet 1; ethernet 2; etc.  On the host, they are are NIC1; NIC2; etc.  and the device names are "Broadcom NetXtreme Gigabit Ethernet <1...4>".  i don't see references to any of these names in Barracuda interface. How do I connect Barracuda's internal NIC to the Hyper-V NIC?

 

FYI: Windows Server 2012 R2 / Hyper-V / Dell R720

BarracudaNGFirewall.VFxxx-vm3.0-fw6.1.1.075-20150727-hyperv (running as Demo)

 

Thanks!

Pete



#5 Sajeev Chandrapragasam

Sajeev Chandrapragasam
  • Members
  • 49 posts

Posted 18 November 2015 - 12:14 AM

Hi there!  I've read that article and can add interfaces.  However, I can't find any place to select the name of the NIC.  In other VMs, the NICs are called ethernet; ethernet 1; ethernet 2; etc.  On the host, they are are NIC1; NIC2; etc.  and the device names are "Broadcom NetXtreme Gigabit Ethernet <1...4>".  i don't see references to any of these names in Barracuda interface. How do I connect Barracuda's internal NIC to the Hyper-V NIC?

 

FYI: Windows Server 2012 R2 / Hyper-V / Dell R720

BarracudaNGFirewall.VFxxx-vm3.0-fw6.1.1.075-20150727-hyperv (running as Demo)

 

Thanks!

Pete

 

You have to bridging in Hyper-V. Check the link below for bridging.

 

http://www.eightforums.com/tutorials/19359-hyper-v-virtual-switch-manager.html%C2%A0