Working with my first ADC 340 load balance device.
Doing a two-armed deployment, and having trouble getting the LB to do SNAT to get updates, remote access etc.
on the balanced LAN I have a network of 10.1.2.0/24
ADC 340 10.1.2.4 Bonded ge-1-1 and ge-1-2 DLA
on the WAN side I have a network of 10.1.1.0/24
ADC 340 10.1.1.100 ge-1-3
on the MGMT side I have a network of 192.168.100.0/24
ADC 340 192.168.100.237 (back port ge-1-0???)
I have tried a handful of routes and SNAT configs, basic firewall ACLS
I am guessing I am missing something that is maybe more specific to the device, or a check mark somewhere allowing the device to do this.
would any of you more experienced techs be able to give me some direction. maybe I should just make another VLAN off the router for the 10.1.2.0/24 network and let it do the NAT& Routing? Making all balanced server traffic go through the ADC seems more elegant to me.
Thanks in advance
problem found, routes, and SNAT good all along. LAG port configuration seemed to be the issue.