Jump to content


Photo

Wrong Status of VPN tunnels in Control Center status map

firewall gti tina controlcenter

  • Please log in to reply
No replies to this topic

#1 Christian Becker

Christian Becker
  • Members
  • 1 posts

Posted 04 August 2016 - 02:21 AM

Hey fellow Barracuda geeks, :-)

 

I have a rather cosmetic but annoying problem with status display of vpn tunnels in the control center status map.

 

We have ten branch offices which connect via TINA tunnel to our HQ. Box models differ, version is 6.2.1.

The VPN status of two of our branch office tunnels show up as failed in the status map. The other eight nearly identical boxes are green.

However there aren't any issues with the VPN connection itself - all work without any problems.

 

As I said before - this is a rather cosmetic issue. It's more annoying because the overall status of the boxes and the clusters appear red.

 

Has anyone seen this issue before? Log files are fine, status page on the boxes themselves look great - just CC sees some sort of problem. :-/

 

Thanks in advance from Berlin!

 

Christian