Jump to content


Seperate NAC from VPN Client

  • Please log in to reply
1 reply to this topic

#1 Kaushik Kulkarni

Kaushik Kulkarni
  • Members
  • 1 posts

Posted 19 September 2017 - 03:55 PM



I have a customer with ticket # 02613503. Who reports that after installing VPN Client v4.1 64-bit exe for his users. He choose to use Barracuda VPN option only. After clicking finish he sees Barracuda Network Access Client.


Also, bottom right hand side from system tray if he runs VPN client > Click Connect it runs Barracuda Network Access Client. If customer runs VPN connector it runs as Barracuda VPN client.


Customer do not likes to see NAC option since he choose install Barracuda VPN.


Any future improvement and suggestions will help.




Kaushik Kulkarni

Technical Support Engineer


5710 Fontanoso Way • San Jose, CA 95138

o: 408-327-8789  | EMAIL mailto:kkulkarni@barracuda.com




#2 Michael Manning

Michael Manning
  • Members
  • 270 posts
  • LocationOhio, USA

Posted 29 March 2018 - 01:20 PM

I realize this is an older thread, but...


Isn't there a radio button to click when running the client installer that allows you to select either NAC and VPN client, or just VPN client?