Jump to content


Photo

External Certificate with VPN Cudalaunch


Best Answer Gavin Chappell, 13 February 2019 - 02:58 AM

There are a few links on Barracuda Campus which may help you:

 

https://campus.barra...-using-openssl/

https://campus.barra...igning request/

https://campus.barra...tes/#heading-10

 

Any generic instructions should work to create the CSR, as the SSL VPN service just uses a standard X509 certificate with RSA key as do many other products.

 

Please note that if you are using a third-party certificate then make sure you upload the intermediate CA bundle as described in this thread, otherwise you may have issues with CudaLaunch and RDP connections:

 

https://community.ba...rom-cudalaunch/

Go to the full post


  • Please log in to reply
2 replies to this topic

#1 Joel Van Rysselberghe

Joel Van Rysselberghe
  • Members
  • 2 posts

Posted 12 February 2019 - 02:30 PM

I would like to configure CudaLaunch with a external Certificate, but I don't find the documentation "How to create the CSR ?"

CudaLaunch is configured, and it works. I have also multiple Ipsec VPN site-to-site on the same box. (F280)

 

Regards,



#2 Gavin Chappell

Gavin Chappell
  • Moderators
  • 417 posts
  • LocationNottingham, UK

Posted 13 February 2019 - 02:58 AM   Best Answer

There are a few links on Barracuda Campus which may help you:

 

https://campus.barra...-using-openssl/

https://campus.barra...igning request/

https://campus.barra...tes/#heading-10

 

Any generic instructions should work to create the CSR, as the SSL VPN service just uses a standard X509 certificate with RSA key as do many other products.

 

Please note that if you are using a third-party certificate then make sure you upload the intermediate CA bundle as described in this thread, otherwise you may have issues with CudaLaunch and RDP connections:

 

https://community.ba...rom-cudalaunch/



#3 Joel Van Rysselberghe

Joel Van Rysselberghe
  • Members
  • 2 posts

Posted 25 February 2019 - 11:53 PM

Thanks, all is in orde now.