Jump to content


Photo

How to give the same IP for a user for the VPN ?

VPN

This topic has been archived. This means that you cannot reply to this topic.
1 reply to this topic

#1 frenay

frenay
  • Members
  • 105 posts

Posted 06 May 2020 - 09:03 AM

Hi,


Currently, I have some VPN IP ranges.

I would like to give the same IP for a client (specific rule to a server). Is is possible by mac adress or others ?

How to make that ?

Thank you for your help!


Regards.



#2 Micha Knorpp

Micha Knorpp
  • Members
  • 195 posts

Posted 27 May 2020 - 03:25 AM

Hi Frenay,

 

it depends on the clien2site setup.

If you use Barracuda Certificate authentication, you can assign a static IP in the certificate (dropdown field at top right corner of the config window - default is "dyn", but you can select a specific IP here.

Be careful as the shown number is not necessarly the IP. You will have to calculate it from the subnet you are using for c2s.

Once assigned, the real IP shows up in the C2S accounts list anyway.

HTH.


regards,
-micha-